Product ID:ARON ALPHA 101
MSDS Date:08/01/1986
FSC:8040
NIIN:00N037431
MSDS Number: BQWST

VIGOR CO

53 WEST 23RD ST
NEW YORK, NY 10010
US

Emergency Phone: 212-807-3845

Info Phone: 212-807-3845

Cage: 50172

VIGOR CO

NEW YORK, NY 10010 US

Telephone: 212-807-3845

Cage: 50172

ACRYLIC ACID, 2-CYANO-, METHYL ESTER;(METHYL

CAS: 137-05-3

RTECS: AS7000000

Fraction By Weight: 99.6%

OSHA PEL 2 PPM;4 STEL

ACGIH TLV: 2 PPM;4 STEL

OTHER INGREDIENTS; (OTHERS)

Fraction By Weight: 0.4%

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN:RAPID POLYMERIZATION WILL OCCUR
ON SKIN WITH HEAT. IF QUANTITY IS LARGE, SKIN BURN MAY HAPPEN.
INHAL:HIGH VAPOR CONCENTRATION CAN INDUCE NASAL MUCUS, HEADACHE,
AND GIDDINESS. EYE:IRRITATION AND L ACHRYMATION WILL OCCUR
SLIGHTLY.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:MILD IRRITATION OF EYES, NOSE AND THROAT.
Medical Cond Aggravated by Exposure:INHAL:NASAL MUCUS, HEADACHE AND
GIDDINESS IN SOME INDIVIDUALS. EYE:LACHRYMATION, IRRITATION.

First Aid:SKIN:WASH MATERIAL OFF SKIN WITH PLENTY OF WATER. EYE:IF
CONTACT OCCURS, IMMEDIATELY FLUSH WITH PLENTY OF WATER FOR AT LEAST
15 MINUTES AND GET MD. INHAL:MOVE TO FRESH AIR. IF COUGH OR
RESPIRATORY SYM PTOMS PERSIST GET MD. INGEST:CALL MD IMMEDIATELY .

Flash Point Method:CC
Flash Point:181F,83C
Lower Limits:2.5%
Extinguishing Media:DRY CHEMICAL, CARBON DIOXIDE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE KNOWN.

Spill Release Procedures:WEAR EYE PROTECTION, PROTECTIVE CLOTHING. WIPE
AND SOAK UP LIQUID WITH ABSORBENT LIKE IF A LARGE QUANTITY IS
SPILLED. VENTILATE SPILL AREA.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:AVOID STORAGE WITH PRIMERS. STORE IN A
DARK, COOL PLACE.
Other Precautions:AVOID CONTACT WITH SKIN AND EYES.

Respiratory Protection:NOT NORMALLY NEEDED IF CONTROLS ARE ADEQUATE.
Ventilation:LOCAL AND MECHANICAL EXHAUST:NORMAL AIR EXCHANGE.
Protective Gloves:RUBBER OR POLYETHYLENE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NOT REQUIRED.
Work Hygienic Practices:NOT REQUIRED.
Supplemental Safety and Health
SOL IN H*2O:WATER CAUSES RAPID POLYMERIZATION.

Boiling Pt:B.P. Text:140F,60C
Melt/Freeze Pt:M.P/F.P Text:34.7F,1.5C
Vapor Pres:0.25 @ 68F
Vapor Density:3.85
Spec Gravity:1.1 (H*2O=1)
Evaporation Rate & Reference:0.22 (BUTYL ACETATE=1)
Solubility in Water:INSOLUBLE. (SUPDAT)
Appearance and Odor:COLORLESS LIQUID WITH ODOR

Stability Indicator/Materials to Avoid:YES
BASIC COMPOUND SUCH AS AMINES.
Stability Condition to Avoid:HIGH HUMIDITY, HIGH TEMPERATURE OR
ULTRAVIOLET RAY.
Hazardous Decomposition Products:WILL NOT OCCUR.
Conditions to Avoid Polymerization:CONTACT WITH BASIC COMPOUND SUCH AS
AMINES.

Waste Disposal Methods:IMMERSE ABSORBENT IN A PAIL OF WATER AND DISPOSE
AS OILY RAGS. WATER WILL CAUSE INSTANT POLYMERIZATION TO AN INERT
SOLID. DISPOSAL MUST BE IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL
REGULATIONS (FP N ).

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.